Wireless Remote Control Anti-Theft Alarm System Intelligent For Motorcycle
Specification: 100% brand new. Working voltage: For DC 9V Static Current: <=4mA Working temperature: -10??~+50??br>Remote control working voltage:DC12V/23A Remote control frequency range: 315Mhz or 433Mhz Remote control distance: open areas??50M Item Size: like the picture show. Package Size: about 11cm(L) X 6cm(W) X 4cm(H)
Features: - 100% Brand new. - Phonic alarm, it can be use to locate your motorcycle - Engine immobilization and anti-hijacking functionality - Four sensitivity alarm settings - This is a simple DIY installation unit with no special tools needed Function Key: (4 buttons) Arm/Anti-robbery: Remote lock Disarm: Remote unlock style Remote Start Engine: Remote start style Find Vehicle: A bell style
Functions: 1. Arm: Press the Arm/Anti-robbery button, the indicator light flashes once, the siren beep once and the status of alarm will be activated automatically after 3 seconds. 2. Disarm: Press the Disarm button, the indicator light flashes 2 times and the siren beep 2 times, then the alarm system is in the "Disarm" mode. 3. Remote Start ON: Within 2 seconds, the connection press the start button twice, to start the engine. 4. Remote Start OFF: In the start state, Press the Disarm button to stop the engine. 5. Find Vehicle: Press Vehicle Finder button, the indicator light flashes 15 seconds and siren beep 15 seconds, Allow owners to find the location of the vehicle, to stop press any button. 6. Anti-robbery and Assistance: When the motocycle is bobbed and is drive away, the motorcycle owner only press the Arm/Anti-robbery button, the engine will stop at once, the siren will beep and the indicator light will flash. 7. Shock Sensor: Warn away: After arming if any light impact, the indicator light flashes 5 times and siren beep 5 times. Full Trigger: After arming if any heavy impact, the indicator light flashes 1 seconds and siren beep (6 tones) 15 seconds. 8. Ignition Trigger: The ignition trigger: in the alarm state, if anyone tries to ignition, the siren starts alarming and the indicators starts flashing. 9. Immobilizer: in the alarm state, the siren starts alarming, the indicator light flashes and the engine cannot be started. 10. Shock Sensor Setting: Keep pressing the fine vehicle button, the remote can adjust the sensor sensitivity of level 1 to 5, according the number of siren beep to set level, (level 1 lowest, level 2 low, ... , level 5 highest)
Note: for remote start engine type
Shipping: Free Shipping Handling time: Ship within 24 hours Delivery Time: 3-7 business days
Warranty: 1. Condition: 100% Brand New 2. Warranty Period: 1 Years 3. 24-Hour Support: Provide you with timely after-sale support
Compression feels even again, and the engine pulls strongly during steep climbs. The gaskets remain dry after several heat cycles, with no visible oil smoke from the exhaust.
The mounting holes aligned with the factory points, and the plate sits firmly beneath the radiator support. It clears the surrounding panels properly, with no vibration or rattling on uneven roads.
After the overhaul, drive and reverse engage promptly without the previous delay. The seals fit their channels correctly, and shift pressure remains consistent through every gear.
Commanded and actual fuel pressure now track closely during acceleration. Idle remains steady, and the engine pulls under load without surging or sudden power loss.
