Yamaha SRX600 1991 Coil Stator 3SX-81410-00+ Voltage Regulator 47X-81960-A1+ Gasket Assy 4DW-15451-00
Yamaha SRX600 1991 Coil Stator 3SX-81410-00+ Voltage Regulator 47X-81960-A1+ Gasket Assy 4DW-15451-00
Couldn't load pickup availability
Fitment:
Fit for Yamaha SRX 400 1991
Fit for Yamaha SRX 600 1991
Replacement Part Number:
Stator Assy: 3SX-81410-00
Rectifier, regulator: 47X-81960-A1, 47X-81960-A3
Gasket, generator cover: 4DW-15451-00, 1VJ-15451-00
Features:
Kit include Stator, Regulator Rectifier and gasket.
Meet or exceeds the OEM quality, direct replacement to your original unit.
Perfect fit and ready to install.
Always use a sealant to mount the cable gland joint.
Instruction is NOT included.
Attention:
One of the most common reasons a stator breaks down is due to a broken regulator, which burns the stator in no time.
Therefore we highly recommend you to switch both parts.
Technically modified stators are excluded from exchange.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator and Regulator Kit
other specification:
Stator
Number of wires: 7
Number of plugs: 4
Number of pins: 1 + 1 + 3 + 2
Number of fixation holes: 5
Number of poles: 18
Pick up pulsar coil included.
Regulator
Number of plugs: 1
Number of pins: 4
Package Includes:
1 x 18-Pole Generator Stator
1 x 4-Pin Voltage Regulator
1 x Crankcase Gasket
Note:
Before installing your new stator regulator rectifier;
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Our stator / regulator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
You will get exactly what you see in pictures, if in doubt do not hesitate to compare our item to your original part.
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.
Share















Got this alternator stator regulator gasket kit for my Honda. Tested the new magneto—all windings pickup coil checked out. Gasket quality’s great; use gasket glue to hold it. Bonus spare voltage regulator, works well. Highly recommend!
Couldn’t find a more professional company to work with good product fair prices and outstanding customer service, I will be doing more business in the future with this company 👍👍👍👍👍
This Stator buy was the right buy !! And my Scooter loves it!!
The coil for my son's Tao Tao GK110 suddenly went out. After checking voltage tolerances I determined the old coil was bad. I installed this coil, but had to change the position of the wires in the plug. This was easy to do with a bobby pin; stripped off the little plastic nub on the end of the bobby pin, and use the pin to unlatch the metal pins in the harness so you can pull them out and replace them in the correct order. The kart fired right up and runs like a scalded dog again.
Reviews in Other Languages
Se adaptó perfecto a mi raptor 660 del 2004