Spectrum Analyzer Signal Generator Wi-Fi 2G 4G LTE CDMA GSM GPRS SA6 6GHz

SA6 6GHz Handheld Portable 3.2" Spectrum Analyzer Signal Generator 35-6200MHz

Feature:
1: SA6 is a simple portable spectrum analyzer and signal source designed to display the signal spectrum from 35 to 6200 MHz.
2: The analyzer finds the amplitude and frequency of the spectral components of the analyzed process. The spectrum analyzer
can process signals from all widely used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc.
3: Another important feature is its tracking generator, which makes it possible to measure the frequency response of passive or active devices
(such as filters or amplifiers). The software allows measurement of SWR and return loss modules. This requires an external directional coupler and a set of calibration measures.
4: SA6 is mainly used for on-site operation. The equipment is sturdy and durable, light in weight, and low in energy consumption. It enables service centers and maintenance
teams to perform on-site HF analysis for commissioning and repair work. In addition, the spectrum analyzer is the perfect solution for repair shops and radio enthusiasts.
5: For example, you can use the device to do the following:Place the external antenna on the base station���Quick analysis of the RF environment
Check the correct operation of the relay cell���Repair and adjustment of repeaters, generators, filters, etc.Measuring SWR when using an external directional coupler
6: It can be controlled through the buttons on the device or the touch screen. Data transmission between analyzer and PC via USB cable. All measurement data are displayed on the screen of the device or PC in real time.

Performance Parameters:
3.2" color resistive touch screen
Wide frequency range: 35 to 6200MHz
Fast sweep of frequency range: 500 points per point
High measurement accuracy: 2dB within 70-75dB dynamic range
Compatibility of Windows-based computers
A device can be used with the help of a PC
Particularly convenient to use
Weight 380g/0.8 lb; Size 150 �� 75 �� 23 mm/5.9 x 3 x 0.9"
Independent power supply can last up to 4 hours of uninterrupted operation, and the wired data transmission to a PC

Specifics:
Condition: 100% Brand New
Display frequency range: 35-6200 MHz
Measuring frequency range: 35-4500 MHz
Dynamic range of 35-3000 MHz: 75 dB
Dynamic range of 3000-4500 MHz: 70 dB
Maximum span: 6165 MHz
Bandwidth: 200 kHz, fixed
View the scanning speed of the frequency band above 100MHz: 700MHz/sec
Scan 100 MHz: Background noise up to 3000 MHz: Background noise 3000-4500 MHz: Background noise 4500-6200 MHz: Wave impedance: 50 ohms
Standing wave ratio in the working frequency range: Internal attenuator: 0-30 dB
Error at attenuation up to 10 dB: 2 dB
10 to 20 dB attenuation error: 5 dB
20 to 30 dB attenuation error: 8 dB
Tracking generator output power: -15 to -25 dBm
Accuracy in dynamic range: 2.0 dB
The maximum input power of the attenuator at 0 dB: 10 dBm
Maximum input power when attenuation is greater than 20dB: +20dBm
Maximum input measurement signal: +10 dBm
Maximum input DC voltage: 25V
Maximum current consumption when running on battery: 450 mA
Maximum current consumption when running from USB: 500 mA (when charging)
Battery: 3000 mAh
Duration time: 4 hours
Battery charging time: ~ 2 hours

Note:
1.Please allow 1-3mm difference due to manual measurement.
2.Due to the light and screen difference, the item's color may be slightly different from the pictures.

Package Included:
1 x Spectrum Analyzer Host
1 x Resistive Touch Pen
2 x 30CM RG405 SMAJB2/SMAJB2 RF connection Cable
1 x SMA-KK Passed
1 x Type-C USB 1M Data Cable
1 x Touch Plectrum Warranty:1 year