HVAC Valve Core Remover Installer Tool Dual Size Sae 1/4" And 5/16"

HVAC Valve Core Remover Installer Tool Dual Size Sae 1/4" And 5/16"

Feature:
1: Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn.
2: Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
3: Easy to Install: The valve core remover installer tools core grabber tool makes it be easily inserted into the inner valve core to control the core.
4: Compatible with most refrigerants(Specific Refrigerant models can consult customer service).

Specifics:
Condition: 100% Brand New
Conneceion: 1/4" or 5/16" Thread

Valve core removal wrench basic operation:
1. Pull out the dead point on the stem, close the valve on the tool, adjust the joint of the tool to the air conditioning interface, and tighten the valve on the air conditioning.
2. Make sure that the tool is connected tightly to the air conditioning valve, then open the valve on the tool. Push the stem into the air conditioning valve and
gently rotate the tail knob of the remover. Find the angle to connect the valve core, and then loosen it.
3. When the valve core is removed, pull out the stem, close the valve on the valve remover, loosen the screw at the end of the tool and take out the valve core. The work is done!

Warning:
We suggest that before removing the valve core, close the valve core wrench valve and disconnect the air conditioner internal connection.

Note:
1.Please allow 1-5mm difference due to manual measurement.
2.Please allow a slight deviation for the measurement data and make sure you do not mind before ordering.

Package Included:
1 X Valve Core Remover
1 X Brass Adapter
10 X Brass Nuts
20 X Valve Cores