Bloque de texto
Válvula de retención de pie en línea NPT de 3/4" con resorte de latón y filtro, 200 PSI
Válvula de retención de pie en línea NPT de 3/4" con resorte de latón y filtro, 200 PSI
No se pudo cargar la disponibilidad de retiro
Característica:
1: Hecho de latón de alta calidad, resistente y duradero para uso a largo plazo.
2: Con buena resistencia a la corrosión y oxidación.
3: La buena capacidad de sellado evita que el fluido tenga fugas.
5: Se utiliza principalmente en agua, aceite, gases no corrosivos y no inflamables.
Detalles específicos:
Material: Latón
Color:Oro
Tamaño de rosca: 1/2"
Dirección del flujo: unidireccional
Presión nominal: 1,6 MPA
Temperatura aplicable: -10 °C - 20 °C
Nota:
1. Permita errores de 1-5 mm debido a la medición manual.
2. El color del elemento que se muestra en las fotos puede verse ligeramente diferente en el monitor de su computadora, ya que los monitores no están calibrados del mismo modo.
El paquete incluye:
1x válvula de retención
Compartir
These little glasses stopped my chickens from pecking each other immediately. They were easy to put on, and the difference was instant. A simple and effective solution that saved my flock from bullying. Very happy with this purchase.
This carburetor fits my Massey Ferguson tractor perfectly! Super cheap and fixed my old carb’s issues. Installed in minutes, fired right up. Tuning was easy with the adjustment screw. Been on a month—survived freezes, fuel lines still soft. Great quality, happy with it!
First time buying these fuel injectors for my John Deere—great quality! O-rings seated perfectly, no leaks or issues since installation. Engine fires strong now, price is awesome. Will absolutely choose this brand again!
This valve is just the thing for switching air/argon on my Primeweld ct520d for switching between plasma cutting and Tig welding. Needed to reverse the handle for clearance, so it's not intuitive which way the valve is open, hence the markings on the box. Left quick release hose is air in. Clear hose on the right is gas in, bottom clear hose goes to the welder, the red hose goes to the gauge on the welder. Used a double male connector to attach the valve to the air dryer, and the setup is sturdy enough to switch the valve one handed.
Exactly as described. Thanks