Bloque de texto
2625 resistencias SMD 1210 5% en chip SMT, 105 valores, libro de muestra, kits de bricolaje YAGEO
2625 resistencias SMD 1210 5% en chip SMT, 105 valores, libro de muestra, kits de bricolaje YAGEO
No se pudo cargar la disponibilidad de retiro
Resistencia SMD 1210 5%, 105 valores, paquete de muestra de 2625 piezas
Característica:
1: Pequeño pero pone todo en su lugar, por lo que ahorra espacio y es fácil de transportar.
2:La etiqueta transparente en la parte delantera y trasera de cada cinta de papel, nunca se mezclan.
3: Tanto los aficionados principiantes como los expertos en electrónica veteranos apreciarán la variedad y organización de los componentes incluidos en este kit.
Detalles específicos:
Condición: 100% nuevo y de alta calidad.
Tipo: Resistencia en chip SMD 1210 5%
Cantidad: 2625 piezas (105 valores, 25 piezas/valor)
Medidas: 19 x 13 x 3 cm (7,5 x 5,1 x 1,2 pulgadas)
Resistencia: (105 valores x 25 piezas)
0R 1R 1.2R 1.5R 1.8R 2R 2.2R 2.7R 3R 3.3R 3.9R 4.7R 5.1R 5.6R 6.8R 7.5R 8.2R 9.1R 10R 12R 15R 18R 20R 22R 27R 30R 33R 39R 47R 51R 56R 68R 75R 82R 91R 100R 120R 150R 180R 200R 220R 270R 300R 330R 390R 470R 510R 560R 680R 750R 820R 910R 1K 1.2K 1,5K 1,8K 2K 2,2K 2,7K 3K 3,3K 3,9K 4,7K 5,1K 5,6K 6,8K 7,5K 8,2K 9,1K 10K 12K 15K 18K 20K 22K 27K 30K 33K 39K 47K 51K 56K 68K 75K 82K 91K 100K 120K 150K 180K 200K 220K 270K 300K 330K 390K 470K 510K 560K 680K 750K 820K 910K 1M 10M
Nota:
1. Permita una diferencia de 1-3 mm debido a la medición manual.
2. Confirme si es adecuado para usted antes de comprar.
El paquete incluye:
1 libro de muestra de resistencias SMD de 2625 piezas al 5%
Compartir

These little glasses stopped my chickens from pecking each other immediately. They were easy to put on, and the difference was instant. A simple and effective solution that saved my flock from bullying. Very happy with this purchase.
This carburetor fits my Massey Ferguson tractor perfectly! Super cheap and fixed my old carb’s issues. Installed in minutes, fired right up. Tuning was easy with the adjustment screw. Been on a month—survived freezes, fuel lines still soft. Great quality, happy with it!
First time buying these fuel injectors for my John Deere—great quality! O-rings seated perfectly, no leaks or issues since installation. Engine fires strong now, price is awesome. Will absolutely choose this brand again!
This valve is just the thing for switching air/argon on my Primeweld ct520d for switching between plasma cutting and Tig welding. Needed to reverse the handle for clearance, so it's not intuitive which way the valve is open, hence the markings on the box. Left quick release hose is air in. Clear hose on the right is gas in, bottom clear hose goes to the welder, the red hose goes to the gauge on the welder. Used a double male connector to attach the valve to the air dryer, and the setup is sturdy enough to switch the valve one handed.
Exactly as described. Thanks