Bloque de texto
Válvula solenoide 2436U1453S8 2436U1453S11 para Kobelco SK60-5 SK200-1 SK200-2
Válvula solenoide 2436U1453S8 2436U1453S11 para Kobelco SK60-5 SK200-1 SK200-2
No se pudo cargar la disponibilidad de retiro
Característica:
1: Hecho de material de alta calidad, duradero y práctico de usar.
2: Alto rendimiento, larga vida útil.
3: Reemplazo directo y fácil instalación.
4: Se recomienda encarecidamente la instalación profesional. No se incluyen instrucciones de instalación.
Detalles específicos:
Condición: 100% nuevo
Tipo: Válvula solenoide de cierre de combustible
Tipo de ajuste: Reemplazo directo
Instrucciones de instalación: No incluidas
Reemplace el número de pieza: SKC5/G24-106-1 2436U1453S8 2436R884F1 2436R884F3
Mueble:
Compatible con Kobelco SK60-5, SK200, SK200LC, SK220, SK220LC, SK300, SK300-2, SK300LC, SK300LC-2,
MD140C, SK400, SK400LC, SK60, SK100, MD200C, SK120, SK120LC, MD240C, SK150LC, SK160LC,
SK130, SK130LC, SK210, SK210LC, SK250, SK250LC
Nota:
1. Permita una diferencia de 1-3 mm debido a la medición manual.
2. Tenga en cuenta que esta pieza no es original, es una pieza de recambio.
3. Antes de comprar, confirme si es adecuado para sus necesidades.
El paquete incluye:
1 X Válvula solenoide de cierre de combustible
Compartir
These little glasses stopped my chickens from pecking each other immediately. They were easy to put on, and the difference was instant. A simple and effective solution that saved my flock from bullying. Very happy with this purchase.
This carburetor fits my Massey Ferguson tractor perfectly! Super cheap and fixed my old carb’s issues. Installed in minutes, fired right up. Tuning was easy with the adjustment screw. Been on a month—survived freezes, fuel lines still soft. Great quality, happy with it!
First time buying these fuel injectors for my John Deere—great quality! O-rings seated perfectly, no leaks or issues since installation. Engine fires strong now, price is awesome. Will absolutely choose this brand again!
This valve is just the thing for switching air/argon on my Primeweld ct520d for switching between plasma cutting and Tig welding. Needed to reverse the handle for clearance, so it's not intuitive which way the valve is open, hence the markings on the box. Left quick release hose is air in. Clear hose on the right is gas in, bottom clear hose goes to the welder, the red hose goes to the gauge on the welder. Used a double male connector to attach the valve to the air dryer, and the setup is sturdy enough to switch the valve one handed.
Exactly as described. Thanks