Car Auto 1/4"SAE 2 OZ Oil Injector Tool A/C AC Oil&Dye Injection Tool

Car Auto 1/4"SAE 2 OZ Oil Injector Tool A/C AC Oil&Dye Injection Tool

Feature:
1: Made of high quality material, oil resistant, durable, wear resistant, corrosion resistant and non-hardening.
2: Compatible with refrigerants(Specific Refrigerant models can consult customer service).
3: Has a 2 oz. capacity and 1/4SAE shut-off adapter. This injector may be used to add most A/C additive to our system from oil, dye, stop leak, etc.
4: NOTE. A/C must be running with the compressor on before injecting additive or refrigerant. Use Cleaning, when finished using the injector tool, clean well by using brake cleaner.

Instructions:
Before adding any additive to the injector, the shut off valve must be off. Unscrew the end off the injector, put in the desired amount of additive,
screw the end back on the injector. And connect refrigerants coupling to the injector, connect other end of the injector to the low side service port on the vehicle,
then open the valve on the injector with refrigerant attached, fill to proper pressure.

Specifics:
Condition: 100% Brand New
Material: Aluminum + Plastic
Tank Capacity: 2 OZ
Working pressure: (600~3000)PSI
Connections: 1/4" outer thread(connects to oil tank)+1/4" inner thread(connects to tube)

Note:
1.Please allow 1-5mm difference due to manual measurement.
2.Please allow a slight deviation for the measurement data and make sure you do not mind before ordering.

Package Included:
1 x A/C Oil Injector