Car Air Conditioning A/C AC Oil and Dye Injector Tool 1/4" SAE 2OZ
Car Air Conditioning A/C AC Oil and Dye Injector Tool 1/4" SAE 2OZ
Couldn't load pickup availability
Feature:
1: Made of high quality material, oil resistant, durable, wear resistant, corrosion resistant and non-hardening.
2: Compatible with refrigerants(Specific Refrigerant models can consult customer service).
3: 2oz refillable oiler (60ml capacity), put the inject oil or fluorescent dye into the system, filling speed is fast, good sealing, not easy to leak during use.
4: AC oil injector tool is suitable for leak detection with fluorescent dyes, universal for any type of oil, including POE or mineral oil,
suitable for all types of refrigerants, suitable for automotive air conditioning systems and all home office air conditioners.
Instructions:
This injector can be used to add most A/C additive to our system from oil, dye, stop leak, etc.
Before adding any additive to the injector, the shut off valve must be off.
Unscrew the end of the injector.
Put in the desired amount of additive.
Screw the end back on the injector.
Connect refrigerants coupler to the injector.
Connect other end of the injector to the low side service port on the vehicle.
Open the valve on the injector.
With refrigerant attached, fill to proper pressure.
When finished using the injector tool, clean well by using brake cleaner.
Note: A/C must be running with the compressor on before injecting additive or refrigerant.
Specifics:
Condition: 100% Brand New
Material: Aluminum + Plastic
Tank Capacity: 2 OZ
In and out thread size: 1/4" SAE
Working pressure: (600~3000)PSI
Note:
1.Please allow 1-5mm difference due to manual measurement.
2.Please allow a slight deviation for the measurement data and make sure you do not mind before ordering.
Package Included:
1 x Oil and Dye Injector
1 x Snap Coupler
Share
This carburetor fits my Massey Ferguson tractor perfectly! Super cheap and fixed my old carb’s issues. Installed in minutes, fired right up. Tuning was easy with the adjustment screw. Been on a month—survived freezes, fuel lines still soft. Great quality, happy with it!
First time buying these fuel injectors for my John Deere—great quality! O-rings seated perfectly, no leaks or issues since installation. Engine fires strong now, price is awesome. Will absolutely choose this brand again!
This valve is just the thing for switching air/argon on my Primeweld ct520d for switching between plasma cutting and Tig welding. Needed to reverse the handle for clearance, so it's not intuitive which way the valve is open, hence the markings on the box. Left quick release hose is air in. Clear hose on the right is gas in, bottom clear hose goes to the welder, the red hose goes to the gauge on the welder. Used a double male connector to attach the valve to the air dryer, and the setup is sturdy enough to switch the valve one handed.
Exactly as described. Thanks
Good voltage reducer 36 to 12 v. I installed it and it seems to be working fine. I am installing lights on my cart. We'll see how long it last.
